-
Hello,
How do I connect Projector audio input to Pyle amplifier? all speakers are connected to Amplifier. I would like to connect projector input to amplifier.
You can connect your projector to the PDA8BU by using the projector's audio output and connecting it to one of the amplifier's audio inputs, such as the AUX (3.5mm) input or the RCA audio input, depending on what outputs your projector provides.
If your projector has a headphone jack or audio-out port, you can use a 3.5mm-to-RCA cable and connect it to one of the RCA input pairs on the PDA8BU. Once connected, select the corresponding input on the amplifier and all speakers connected to the PDA8BU will play the projector's audio.
If your projector only has HDMI output and no separate audio output, you may need an HDMI audio extractor to convert the HDMI signal into RCA or 3.5mm audio for the amplifier.
-
Hello, We have all the speakers hooked up and the only front R an L will work? Checked all the other speakers and they work?
Thank you.
Check the volume level of the suround and Center speakers befor adjusting the main volume
-
Hello. PDA8BU
Am I missing something. I see no control for CD/DVD? Nothing on screen but AUX, FM, Blue.
Where would you put cables for TV to have surround sound while watching TV?
Since there is no Selector knob provided for the CD/DVD inputs, it actually works simultaneously If you play a DVD it will work right away and just lift the volume for music or sound
-
Is there some way to delete FM stations that are added during the scan? There are many stations added that are just static and I don't want to skip them each time I'm changing between stations.
NO
-
Do I need a powered sub to run my pda8bu Pyle receiver
YES
-
I just bought this item at Amazon in the description says the Output Power is 300 Watts, but now I see comparing in the same page with similar items apears is only output wattage 150 watts. Can you tell me pleas what is right watts for this product 300 or 150?. Than you
Looking at the listing we have, what was stated was a120W RMS Total for all 5 channels. However, it maybe a maximum total peak power that you saw.
-
I plugged CD cables in #18 and it works fine, but when I plugged the white & red cable from turntable into Pyle PDA8BU receiver, but minimal to no sound is coming through speakers. Why is it not working?
It is because the turntable requires a phono preamp to work
-
lost my manual how do i program radio stations
Press the mode button and look for FM.
Press the Play/Pause button to let it automatically scan all the strong signals it can pick up.
After having all station scanned and save, you can now search them by pressing the PREVIOUS and NEXT Buttons.
-
Where can I order a new remote control for model: PDA8BU I just bought this, and the kids have lost the remote?
contact us through email to have you direct to parts department
-
The EQ button on my remote does not change anything on the receiver, could the remote have an issue? I have to keep pushing the volume button to get it to change volume also. Model PAD8BU. I just bought this from a retailer that went out of business.
Thank you.
This unit does not have an EQ feature that is why it is not working on this unit
-
Can I lower the start up tone and mode switch button tone ? When I connect to Bluetooth or on start up its an extremely loud tone alert.
Normally the notification tones are controled by the master volume. However if it is bypassing the master volume, there is no other way to lower its tone
-
Which speakers would work well with this receiver?
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Why does this unit have a high humming sound when turned on
Please check the speaker wires connected to the unit. Try to change it to see if there will be any difference.
-
Will this unit play sound out to bluetooth headphones?
Also, I’ve tried the preset EQ hand haven’t noticed any sound settings.
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
There is a loud noticeable hum (whine) from the unit when on. Loud enough to be distracting when listening to quiet music. Is this a defect or a setting issue.
Check all the wiring connections made with the unit as well as all the wires used if there is any damage, cut of frayed.
Check also the speaker connection.
-
Operators Manual - was not included in the box, why?
Please see the link provided for the manual of the unit.
https://www.manua.ls/pyle/pda8bu/manual
